The FlxMesh 4M
The FlxMesh 4M is an advanced mesh node that can provide customers with mobility within our MCW Wireless mesh architectures. The FlxMesh 4M is mounted in vehicles, and utilizes a single magnet mount antenna (Omni). The FlxMesh 4M comes supports mobility in 2.4GHz, 4.9GHz and 5GHz mesh networks allowing for greater data rates to vehicles moving within the mesh. MCW Wireless mesh architectures provide the FlxMesh 4M with low latency, and seamless handoffs between nodes. Speeds have been tested >60 Mph providing mobility within our Mesh Networks. This mobility solution is outstanding fit for the Military Public Safety architectures, and augmenting perimeter security challenges.
The FlxMesh 4M product supports and ADHOC Mesh capability, where should the mobile node travel outside of the range of Wireless Mesh Infrastructure, the mobile node will create an ADHOC mesh with other vehicles using our FlxMesh 4M nodes; thus allowing vehicles to communicate with each other. These vehicles once returning to our Wireless Mesh Infrastructure then rejoin the original mesh.
FlxMesh 4 Capabilities
The MCW Wireless FlxMesh 4 provides customers with a consistently reliable and proven metrics in deployed architectures.
Latency: 1 ms per hop
Maximum Number of Hops: 30 hops tested (VOIP & DATA)
Throughput: 54 Mbps, 108 Mbps Turbo-mode (UDP)
FlxMesh 4 Feature Set
- Four Radio Node
- Multiple Frequencies Supported 2.4GHz, 4.9GHz and 5GHz per radio (software configurable)
- Supports Point-to-Point, Point-to-Multipoint, Mesh, Mobility and WIFI Access Architectures
- Integrates into existing architectures (operates as an OSI Layer 2 mode)
- Self Healing and Self Configuring
- Automatic Frequency Selection or Manual
- Adjustable Channel Widths 5MHz, 10MHz, 15MHz, 20MHz (20MHz is the max channel size per FCC, for the 4.9GHz band)
- Adjustable ACK Timing and Transmit Power Control per Radio
- Adaptive Modulation OFDM (BPSK, QPSK, QAM 16, QAM 64)
- Security in Depth, ACLs, MAC Filtering, Backhaul Traffic Encrypted 128 bit WPA/AES
- Secure Access Point supporting WEP, WPA, 802.11i and extended authentication
- FIPS 140-2 Certified
- Deterministic Latency and Jitter (low Latency < 2ms per hop)
- Client Authentication 802.11a/(802.11b/802.11g)
- Quality of Service (802.11e) Prioritized Traffic Control
- Multiple SSID and VLAN Support (802.1q)
- Comprehensive Network Management System
- Role Based Access
|
